Home > Apartment, commercial and industrial buildings > Double wall insulated and single wall chimneys > Cascade system

logout,

logout, logout, logout,

Click on the images to zoom in

Cascade system
Smoke exhaust system
for gas boilers installed in cascade

The cascade system developed by Poujoulat is a technical solution for the smoke exhaust of gas boilers installed in line or back-to-back. This range is adapted for the boiler connection and for building a header.

This system is perfectly water and pressure tight thanks to its silicone lip seal installed on-site.

This system has been developed to optimize the appliances ‘efficiency significant fuel saving and complies with the new building regulations.

When using the anti back draught valve at the boiler’s outlet, the diameter of the installation can be reduced.

The Poujoulat brands are recognized for the quality and the efficiency and recommended by the largest European heating appliances’ manufacturers.


  • For newly build or renovation
  • For inside commercial buildings and appartments
  • For installations with at least two condensing boilers equipped with valve.
  • Delivered in kits
  • Already equipped with seals
  • Ten-year guarantee and CERIC Tested (test laboratory)

 

logo-CE.png  logo_CERIC.png

The Cascade System is made out of 316L stainless steel and seam-welded. This system is perfectly water and pressure tight thanks to its silicone lip seal installed on-site.





Kits for two boilers composed of :

  • two 135° tees (T branch in diameter 110 mm)
  • two 90° vertically adjustable elbows
  • a side drain plug
  • a siphon with liner
  • a 30 ml silicone grease
  • smoke test included

In this kit, the distance in between the boilers can be adjusted from 48 to 58 cm.

 

Kit for additional boiler composed of :

  • a 135° tee (with T branch in diameter 110 mm)
  • a 90° vertically adjustable elbow
  • smoke test included

 

In this kit, the distance in between the boilers can be adjusted from 48 to 58 cm.

 



Notice de pose

 

Clapet anti-retour (PDF - 379 Ko)

 


 

Assistance technique


Cheminées Poujoulat dispose d’un bureau d’études et d’une assistance technique pour aider les professionnels à mettre en place leurs projets et pour répondre aux différentes questions d'ordre technique ou réglementaire. N’hésitez pas à nous contacter :

indigo poujoulat

 


 

Formation Poujoulat


Cheminées Poujoulat a developpé plusieurs programme de formation spécifiquement destinés aux prescripteurs, techniciens, commerciaux et installateurs. Ces programmes vous permettent de développer votre expertise et votre capacité à préconiser la solution Poujoulat la plus performante. Accédez aux différentes formations.

 

AGECIC, partenaire du groupe Poujoulat


Le centre de formation AGECIC dispose d’installations uniques en Europe pour accompagner les installateurs jusqu’à leurs certifications via des programmes d’initiation, de formation et de manipulation. Pour découvrir les différentes formations proposées, consultez le site www.agecic.asso.fr.

  • Advantages
    • For newly build or renovation
    • For inside commercial buildings and appartments
    • For installations with at least two condensing boilers equipped with valve.
    • Delivered in kits
    • Already equipped with seals
    • Ten-year guarantee and CERIC Tested (test laboratory)

     

    logo-CE.png  logo_CERIC.png

  • Characteristics

    The Cascade System is made out of 316L stainless steel and seam-welded. This system is perfectly water and pressure tight thanks to its silicone lip seal installed on-site.





    Kits for two boilers composed of :

    • two 135° tees (T branch in diameter 110 mm)
    • two 90° vertically adjustable elbows
    • a side drain plug
    • a siphon with liner
    • a 30 ml silicone grease
    • smoke test included

    In this kit, the distance in between the boilers can be adjusted from 48 to 58 cm.

     

    Kit for additional boiler composed of :

    • a 135° tee (with T branch in diameter 110 mm)
    • a 90° vertically adjustable elbow
    • smoke test included

     

    In this kit, the distance in between the boilers can be adjusted from 48 to 58 cm.

     




Apartment, commercial and industrial buildings


Other websites edited by Poujoulat:


How to install a chimney , a chimney stack ?
How to connect an appliance, and how to line a chimney ?

Cheminées Poujoulat is the specialist in production of metallic chimneys, chimney stacks , accessories for single houses, collective buildings, industrail and offices applications, for new buildings and renovations.
Cheminées Poujoulat offers a wide choice of solutions for flexible and rigid linings, connecting chimneys for all typs of appliances , inserts, wood stove, pellet stove, and boilers. Besides, Poujoulat can offer various solutions to improve the smoke evacuation : smoke extractor fans, warm air distribution, draft regulators, solution for maintening and sweeping the chimneys.



Service and assistance


Follow us on

picto youTube